Menu
Your Cart

Arken Optics Halo Scope Rings Precision 34mm Picatinny Riflescope Mounts

Arken Optics Halo Scope Rings Precision 34mm Picatinny Riflescope Mounts

  • ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions. With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency.
  • Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting. Hex wrench included.
  • Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.
  • Available in 30mm or 34 mm diameter. Only work with Picatinny spec mounts—Not work with Weaver mounts.
  • Halo scope rings are t serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize for added protection against scratches and blemishing.

ARKEN OPTICS Halo Series billet precision scope rings are CNC machined from 7075 aircraft-grade aluminum that have ZERO tolerances for errors in any conditions.

With ARKEN’s endless pursuit for precision, HALO rings are machined in pairs for ultimate accuracy and consistency. Torx style socket screws along with enhanced recoil lugs result in amazing stability and secure mounting.

Arken Optics recommends max torque settings no greater than 18in/lb for ring screws and 30in/lbs for base screws. The optic manufacturer's specification shall always supersede Arken's Halo Rings specification, unless higher.


Which ring height should I get?

***These recommendations should be used as a guide and may not fit all applications (Based on 50mm Objective lens contacting barrel/AR forends). There are several easy to find ring height calculators available online. ***

Rem 700 footprints = low rings (0.92") (up to 40 MOA scope rail)

Ruger RPR = medium rings (1.26")

Ruger American = low rings (0.92")

Savage 110 = low rings (0.92")

Tikka = low rings (0.92")

Sako = low rings (0.92")

AR Platform = ARP Rigid Mount (1.50")

med rings (1.26")

For the new EP5 with the 56mm objective the following are our recommendations:

Rem 700 and clones = medium rings (1.26") with bull barrels and 20 MOA rails

This will be the case for most platforms out there with the exception of anything with AR style shrouds. Then you will need to use a scope rings height calculator.


From the brand

***These recommendations should be used as a guide and may not fit all applications (Based on 50mm Objective lens contacting barrel/AR forends). There are several easy to find ring height calculators available online. ***

Rem 700 footprints = low rings (0.92") (up to 40 MOA scope rail)

Ruger RPR = medium rings (1.26")

Ruger American = low rings (0.92")

Savage 110 = low rings (0.92")

Tikka = low rings (0.92")

Sako = low rings (0.92")

AR Platform = ARP Rigid Mount (1.50")

med rings (1.26")

For the new EP5 with the 56mm objective the following are our recommendations:

Rem 700 and clones = medium rings (1.26") with bull barrels and 20 MOA rails

This will be the case for most platforms out there with the exception of anything with AR style shrouds. Then you will need to use a scope rings height calculator.

Write a review

Note: HTML is not translated!
Bad Good